Deviceways

Security camera

ZTE K540

Contribute

Projects for this device

Replacement firmware

Replace supported camera firmware with local RTSP and ONVIF video, browser controls and recording to an SD card or network storage.

How to get started

Match the camera’s hardware to the supported list and follow its installation page. The method may use an SD installer, USB Cloner, serial access or a flash programmer.

Setup
Replacement firmware; model-specific flashing method
You’ll need
Exact listed processor, image sensor and Wi-Fi combination; equipment specified in its model guide.
ATBM6032 Wi-Fi
Get Thingino firmware Published build · 4 Oct 2026
ATBM6032 Wi-Fi
Get Thingino firmware Published build · 4 Oct 2026
Original project github.com

Recorded configuration: 16 MB flash

Configured features
Audio, Memory-card support

Recorded configuration: 16 MB flash

Configured features
Audio, Memory-card support
Sources
Replacement firmware

Replace supported camera software with local video streams, browser controls and connections to your recorder.

How to get started

Identify the camera board and its hardware, then use the matching installation guide. Some documented Xiongmai devices accept an upgrade image through their normal interface; other devices need board-level access.

Setup
Replacement firmware; upgrade interface or hardware access, depending on board
You’ll need
Exact supported board, image sensor and flash configuration; use its documented installation route.
Original project github.comInstallation guide github.com

Hardware details

Security

Saved scan

No device-specific advisory matched our saved CVE research.

Check security advisories for this device · CVE.org