Modified original firmware
Add local RTSP and ONVIF video, browser controls and smart-home motion events to the supported MStar-based Yi cameras.
How to get started
Match the model, serial prefix and firmware in the table, then use the matching files on a FAT32 SD card to flash the camera. Configure it through the new browser interface.
- Setup
- Firmware replacement installed from SD card
- You’ll need
- Model, serial prefix, firmware and release files from the same MStar table row.
Open device guidegithub.com
- Required manufacturer firmware
- 4.2.0*
- Setup
- Match both the serial prefix and original firmware in the same upstream table row. Yi project families are not interchangeable.
- Match both the serial prefix and original firmware in the same upstream table row.
- Yi project families are not interchangeable.
- Original firmware: 4.2.0*