Add local RTSP and ONVIF video, browser controls and motion events for smart-home systems to supported Yi cameras.
How to get started
Find the exact camera, serial prefix and firmware row, then put its release files on a FAT32 microSD card. Boot the camera with the card and finish setup in its browser interface.
- Setup
- SD-card modification of original firmware
- You’ll need
- Model, serial prefix and firmware from the same support-table row; microSD card kept inserted.
- Hardware revision not specified
- Partial support documentedOpen device guide
- Hardware revision not specified
- Partial support documentedOpen device guide
- Required manufacturer firmware
- 12.1.05*
- Setup
- Match both the serial prefix and original firmware in the same upstream table row. Yi project families are not interchangeable. Keep the dedicated microSD card inserted.
- Limitations
- beta version (check this issue https://github.com/roleoroleo/yi-hack-Allwinner-v2/issues/484)
- Required manufacturer firmware
- 9.0.05*
- Setup
- Match both the serial prefix and original firmware in the same upstream table row. Yi project families are not interchangeable. Keep the dedicated microSD card inserted.
- Limitations
- beta version (check this issue https://github.com/roleoroleo/yi-hack-Allwinner-v2/issues/484)
- Keep the dedicated microSD card inserted.
- Match both the serial prefix and original firmware in the same upstream table row.
- Yi project families are not interchangeable.
- Original firmware: 9.0.05*
- Keep the dedicated microSD card inserted.
- Match both the serial prefix and original firmware in the same upstream table row.
- Yi project families are not interchangeable.
- Original firmware: 12.1.05*
