Deviceways

Security camera

Xiaomi MJSXJ03HL

Contribute

Projects for this device

Replacement firmware

Replace supported camera firmware with local RTSP and ONVIF video, browser controls and recording to an SD card or network storage.

How to get started

Match the camera’s hardware to the supported list and follow its installation page. The method may use an SD installer, USB Cloner, serial access or a flash programmer.

Setup
Replacement firmware; model-specific flashing method
You’ll need
Exact listed processor, image sensor and Wi-Fi combination; equipment specified in its model guide.
t31l
Get Thingino firmware Published build · 4 Oct 2026
T31N
Processor: t31nGet Thingino firmware Published build · 4 Oct 2026Get Thingino firmware Published build · 4 Oct 2026
Original project github.com

t31l

Configured features
Audio, Memory-card support

t31n

Configured features
Audio, Memory-card support

t31n

Configured features
Audio, Memory-card support
Sources
Replacement firmware

Replace supported camera software with local video streams, browser controls and connections to your recorder.

Applies to
Scope in the original guide
Applies to
Scope in the original guide

How to get started

Identify the camera board and its hardware, then use the matching installation guide. Some documented Xiongmai devices accept an upgrade image through their normal interface; other devices need board-level access.

Setup
Replacement firmware; upgrade interface or hardware access, depending on board
You’ll need
Exact supported board, image sensor and flash configuration; use its documented installation route.
Original project github.comInstallation guide github.com

Hardware differences

Security

Saved scan

No device-specific advisory matched our saved CVE research.

Check security advisories for this device · CVE.org