Xiaomi Dafang Firmware & Modifications

Replacement firmware

Turn a supported older camera into a local RTSP or MJPEG camera, with SSH access and room for your own applications.

Flash the release through the camera’s documented microSD-card recovery method, then put the network and camera configuration files on the card.

Setup: Replacement firmware installed through microSD recovery
You’ll need: Exact listed T20 camera, matching image, microSD card and Wi-Fi configuration.

Setup: Confirm the documented Ingenic T20 variant; classic ARM Xiaofang and T10 use other projects.

Sources

Replacement firmware

Use a community camera firmware on listed older hardware.

Install the model’s SD bootloader through the documented recovery process, then keep the custom firmware files and Wi-Fi settings on a microSD card.

Setup: Model-specific bootloader installation and SD-card firmware
You’ll need: Exact camera hardware and starting firmware; matching bootloader and microSD card kept inserted.

Setup: Check exact model, processor revision and original firmware before using the upstream custom firmware.
Limitations: The README warns that newer original firmware can disable this installation method. Classic ARM Xiaofang uses a different project; Xiaofang 1S T20L support is beta.
Limitations: The README warns that newer original firmware can disable this installation method.; Classic ARM Xiaofang uses a different project; Xiaofang 1S T20L support is beta.

Classic ARM Xiaofang uses a different project; Xiaofang 1S T20L support is beta.
The README warns that newer original firmware can disable this installation method.

Xiaomi Dafang