Security camera

Wyze Cam Pan v2

Projects for this device

Replacement firmware

Thingino

Replace supported camera firmware with local RTSP and ONVIF video, browser controls and recording to an SD card or network storage.

How to get started

Match the camera’s hardware to the supported list and follow its installation page. The method may use an SD installer, USB Cloner, serial access or a flash programmer.

Setup: Replacement firmware; model-specific flashing method
You’ll need: Exact listed processor, image sensor and Wi-Fi combination; equipment specified in its model guide.

Published build · 4 Oct 2026

Get Thingino firmwarethingino.com

Original project github.com

Recorded configuration: 16 MB flash

Configured features: Audio, Memory-card support

Sources

SD-card add-on

Wyze Mini Hacks

Partial support documented

Add local video streaming, network-storage access and other tools while keeping the supported Wyze camera’s original firmware.

How to get started

Prepare the project’s FAT32 microSD card and configure its tools. Wyze v3 and Pan v2 use the SD add-on directly; v2 and Pan v1 also require the guide’s custom installation image.

Setup: SD-card add-on; additional installation image on v2 and Pan v1
You’ll need: Match model and firmware, including the documented video limits; keep microSD inserted.

Open setup guidegithub.com

Original project github.com

Required manufacturer firmware: <= 4.49.1.47
Setup: Read both the supported-device and firmware-compatibility tables.
Limitations: The maintainer explicitly reports inactive development and recommends Thingino. Vertical tilt only works at speed 9.
Limitations: The maintainer explicitly reports inactive development and recommends Thingino.; Vertical tilt only works at speed 9.

Original firmware: <= 4.49.1.47
The maintainer explicitly reports inactive development and recommends Thingino.
Vertical tilt only works at speed 9.

Sources

Wyze Cam Pan v2 — Project reference (github.com) ↗

Community modification

wz_mini_hacks

Add local streams, access and integrations while retaining stock firmware.

Applies toFirmware: up to 4.49.1.47

How to get started

Prepare the project’s FAT32 microSD card and configure its tools. Wyze v3 and Pan v2 use the SD add-on directly; v2 and Pan v1 also require the guide’s custom installation image.

Setup: SD-card add-on; additional installation image on v2 and Pan v1
You’ll need: Match model and firmware, including the documented video limits; keep microSD inserted.

Original project github.com Installation guide github.com