Deviceways

Security camera

Wyze Cam Pan v1

Contribute

Projects for this device

Replacement firmware

Turn a supported older camera into a local RTSP or MJPEG camera, with SSH access and room for your own applications.

How to get started

Flash the release through the camera’s documented microSD-card recovery method, then put the network and camera configuration files on the card.

Setup
Replacement firmware installed through microSD recovery
You’ll need
Exact listed T20 camera, matching image, microSD card and Wi-Fi configuration.
Hardware revision not specified
Open device guidegithub.com
Original project github.com

No separate retail hardware revision is recorded.

Setup
Confirm the documented Ingenic T20 variant; classic ARM Xiaofang and T10 use other projects.
Sources
Replacement firmware

Replace supported camera firmware with local RTSP and ONVIF video, browser controls and recording to an SD card or network storage.

How to get started

Match the camera’s hardware to the supported list and follow its installation page. The method may use an SD installer, USB Cloner, serial access or a flash programmer.

Setup
Replacement firmware; model-specific flashing method
You’ll need
Exact listed processor, image sensor and Wi-Fi combination; equipment specified in its model guide.
jxf22 image sensor
Image sensor: jxf22Get Thingino firmware Published build · 4 Oct 2026
jxf23 image sensor
Image sensor: jxf23Get configuration Published build · 4 Oct 2026
Original project github.com

jxf22 image sensor

Configured features
Audio, Memory-card support

jxf23 image sensor

Configured features
Audio, Memory-card support
Sources
SD-card add-on
Partial support documented

Add local video streaming, network-storage access and other tools while keeping the supported Wyze camera’s original firmware.

How to get started

Prepare the project’s FAT32 microSD card and configure its tools. Wyze v3 and Pan v2 use the SD add-on directly; v2 and Pan v1 also require the guide’s custom installation image.

Setup
SD-card add-on; additional installation image on v2 and Pan v1
You’ll need
Match model and firmware, including the documented video limits; keep microSD inserted.
Hardware revision not specified
Partial support documented
Open setup guidegithub.com
Original project github.com

No separate retail hardware revision is recorded.

Setup
Read both the supported-device and firmware-compatibility tables.
Limitations
The maintainer explicitly reports inactive development and recommends Thingino. RTSP audio is unavailable above firmware 4.9.8.1002 / 4.10.8.1002 respectively.
Limitations
The maintainer explicitly reports inactive development and recommends Thingino.; RTSP audio is unavailable above firmware 4.9.8.1002 / 4.10.8.1002 respectively.

No separate retail hardware revision is recorded.

  • RTSP audio is unavailable above firmware 4.9.8.1002 / 4.10.8.1002 respectively.
  • The maintainer explicitly reports inactive development and recommends Thingino.
Sources
Replacement firmware

Add local camera streaming, browser controls and smart-home connections to the supported older Dafang, Xiaofang, Wyze and related cameras.

How to get started

Install the model’s SD bootloader through the documented recovery process, then keep the custom firmware files and Wi-Fi settings on a microSD card.

Setup
Model-specific bootloader installation and SD-card firmware
You’ll need
Exact camera hardware and starting firmware; matching bootloader and microSD card kept inserted.
Hardware revision not specified
Open device guidegithub.com
Original project github.com

No separate retail hardware revision is recorded.

Setup
Check exact model, processor revision and original firmware before using the upstream custom firmware.
Limitations
The README warns that newer original firmware can disable this installation method. Classic ARM Xiaofang uses a different project; Xiaofang 1S T20L support is beta.
Limitations
The README warns that newer original firmware can disable this installation method.; Classic ARM Xiaofang uses a different project; Xiaofang 1S T20L support is beta.

No separate retail hardware revision is recorded.

  • Classic ARM Xiaofang uses a different project; Xiaofang 1S T20L support is beta.
  • The README warns that newer original firmware can disable this installation method.
Sources
App or integration

Use supported Wyze cameras in other viewing and recording software while keeping their existing firmware.

Applies toFirmware: WYZECP1_JEF; README4.10.9.x

How to get started

Run Docker Wyze Bridge on a computer or through Home Assistant, then connect your Wyze account and API credentials.

Setup
external Docker application or Home Assistant add-on
You’ll need
A supported camera, a running host and Wyze account/API credentials.
Original project github.com

Hardware differences

Security

Saved scan

No device-specific advisory matched our saved CVE research.

Check security advisories for this device · CVE.org