Deviceways

Smart plug

Teckin SP10

Contribute

Projects for this device

Replacement firmware

Create local smart-home controls and automations using the device’s documented configuration.

How to get started

Start with the device configuration, add your network settings and build the firmware. Use the first-install route specified in that device’s guide.

Setup
Custom configuration + firmware installation
You’ll need
The documented board version and pin configuration; a serial adapter or another supported installation route.
Open device guidedevices.esphome.io
Original project esphome.io
Build
Build firmware from the device configuration.
Sources
Replacement firmware

Control compatible smart-home devices locally through a web interface and MQTT automations.

How to get started

Install firmware for the device’s controller, then apply its documented template. Many first installations require opening the device and connecting a serial adapter.

Setup
Firmware installation + device template
You’ll need
The controller and template listed in the device record; disconnect mains power before a serial connection.
Get device templatetemplates.blakadder.com
Original project tasmota.github.io
Sources
Technical references

Security

Saved scan

No device-specific advisory matched our saved CVE research.

Check security advisories for this device · CVE.org