Replacement firmware
Replace router software with a customizable system for network controls and community packages.
How to get started
Follow the guide for your exact router version. The first installation may use its web interface, recovery mode or a serial connection.
- Setup
- Firmware replacement; route varies by router
- You’ll need
- Exact hardware revision, an appropriate OpenWrt release and its model-specific installation guide.
- DANT-1
- Open device guide
- DANT-T
- Open device guide
- DANT-V
- Open device guide
- DANT-1; cFeon EN25Q128-104FIP · Winbond W9751G6KB-25
- Open hardware record
- DANT-T; Macronix MX25L6445EMI · Winbond W9751G6KB-25
- Open hardware record
- DANT-V; Spansion FL128SAIF00 · EtronTech EM68B16CWQD-25H
- Open hardware record
Recorded configuration: 8/16 MB flash; 64 MB RAM
- Limitations
- DSL modem WiFi 2.4GHz partly Stock bootloader CFE must be installed
- Limitations
- DSL modem
- Limitations
- WiFi 2.4GHz partly
- Limitations
- Stock bootloader
- Limitations
- CFE must be installed
Recorded configuration: 8/16 MB flash; 64 MB RAM
- Limitations
- DSL Modem WiFi 2.4GHz partly Stock bootloader CFE must be installed
- Limitations
- DSL Modem
- Limitations
- WiFi 2.4GHz partly
- Limitations
- Stock bootloader
- Limitations
- CFE must be installed
Recorded configuration: 16 MB flash; 64 MB RAM
- Limitations
- DSL Modem WiFi 2.4GHz partly
- Limitations
- DSL Modem
- Limitations
- WiFi 2.4GHz partly