Smart plug

Teckin SP22

Contribute

Projects for this device

Replacement firmware

ESPHome

esphome_ on X

Create local smart-home controls and automations using the device’s documented configuration.

How to get started

Start with the device configuration, add your network settings and build the firmware. Use the first-install route specified in that device’s guide.

Setup: Custom configuration + firmware installation
You’ll need: The documented board version and pin configuration; a serial adapter or another supported installation route.

Open device guidedevices.esphome.io

Original project esphome.io

Build: Build firmware from the device configuration.
Configured features: Electrical measurements

Sources

Replacement firmware

OpenBeken

Use supported smart-home devices locally with MQTT and Home Assistant integrations.

How to get started

Identify the controller, use its supported flashing tool and apply the device’s pin settings. The linked device record may show the wiring.

Setup: Controller-specific firmware installation + pin setup
You’ll need: Matching controller and pin configuration; first installation commonly needs a serial adapter.

Open device guidewww.elektroda.com

Original project github.com

Sources

Teckin SP22 — Project reference (github.com) ↗

Replacement firmware

Tasmota

Control compatible smart-home devices locally through a web interface and MQTT automations.

How to get started

Install firmware for the device’s controller, then apply its documented template. Many first installations require opening the device and connecting a serial adapter.

Setup: Firmware installation + device template
You’ll need: The controller and template listed in the device record; disconnect mains power before a serial connection.

Get device templatetemplates.blakadder.com

Original project tasmota.github.io

Sources