Deviceways

Lighting device

Shelly Plus RGBW PM

Contribute

Projects for this device

Replacement firmware

Connect supported Shelly devices directly to Apple Home with community firmware.

How to get started

Use the project’s conversion route for your Shelly model and stock version, then pair the device with Apple Home.

Setup
Firmware conversion over the local network
You’ll need
A model and starting firmware version listed by the project; features vary by device.
Open device guidegithub.com
Original project github.com
Setup
Check the exact Shelly model/generation and upstream stock-firmware prerequisite.
Limitations
Shelly Cloud and MQTT are not supported by this firmware. Temperature/humidity measurement requires the documented AddOn/sensor hardware where indicated.
Configured features
Brightness control, Colour control, Colour-temperature control
Limitations
Shelly Cloud and MQTT are not supported by this firmware.
Limitations
Temperature/humidity measurement requires the documented AddOn/sensor hardware where indicated.
Sources
Replacement firmware

Control RGBW lighting from Apple Home.

How to get started

Follow the project’s stock-to-HomeKit OTA conversion.

Setup
Replacement firmware · OTA
You’ll need
Plus RGBW PM; upstream asks for stock 2.0.0 on Plus/Gen3 before conversion.
Original project github.com

Hardware details

Security

Saved scan

No device-specific advisory matched our saved CVE research.

Check security advisories for this device · CVE.org