Switch or relay

Shelly Plus 1PM Mini

Projects for this device

Replacement firmware

Create local smart-home controls and automations using the device’s documented configuration.

Start with the device configuration, add your network settings and build the firmware. Use the first-install route specified in that device’s guide.

Setup: Custom configuration + firmware installation
You’ll need: The documented board version and pin configuration; a serial adapter or another supported installation route.

Open device guidedevices.esphome.io

Sources

Replacement firmware

Connect supported Shelly devices directly to Apple Home with community firmware.

Use the project’s conversion route for your Shelly model and stock version, then pair the device with Apple Home.

Setup: Firmware conversion over the local network
You’ll need: A model and starting firmware version listed by the project; features vary by device.

Setup: Check the exact Shelly model/generation and upstream stock-firmware prerequisite.
Limitations: Shelly Cloud and MQTT are not supported by this firmware. Temperature/humidity measurement requires the documented AddOn/sensor hardware where indicated.
Limitations: Shelly Cloud and MQTT are not supported by this firmware.
Limitations: Temperature/humidity measurement requires the documented AddOn/sensor hardware where indicated.

Sources