Switch or relay

Shelly 2

Contribute

Projects for this device

Replacement firmware

Shelly HomeKit

Connect supported Shelly devices directly to Apple Home with community firmware.

How to get started

Use the project’s conversion route for your Shelly model and stock version, then pair the device with Apple Home.

Setup: Firmware conversion over the local network
You’ll need: A model and starting firmware version listed by the project; features vary by device.

Open device guidegithub.com

Original project github.com

Setup: Check the exact Shelly model/generation and upstream stock-firmware prerequisite.
Limitations: Shelly Cloud and MQTT are not supported by this firmware. Temperature/humidity measurement requires the documented AddOn/sensor hardware where indicated.
Limitations: Shelly Cloud and MQTT are not supported by this firmware.
Limitations: Temperature/humidity measurement requires the documented AddOn/sensor hardware where indicated.

Sources

Shelly 2 — quick start — Project reference (github.com) ↗

Replacement firmware

Tasmota

Control compatible smart-home devices locally through a web interface and MQTT automations.

How to get started

Install firmware for the device’s controller, then apply its documented template. Many first installations require opening the device and connecting a serial adapter.

Setup: Firmware installation + device template
You’ll need: The controller and template listed in the device record; disconnect mains power before a serial connection.

Get device templatetemplates.blakadder.com

Original project tasmota.github.io

Sources