Deviceways

Curtain or blind controller

Shelly 2.5

Contribute

Projects for this device

Replacement firmware

Create local smart-home controls and automations using the device’s documented configuration.

How to get started

Start with the device configuration, add your network settings and build the firmware. Use the first-install route specified in that device’s guide.

Setup
Custom configuration + firmware installation
You’ll need
The documented board version and pin configuration; a serial adapter or another supported installation route.
Open device guidedevices.esphome.io
Original project esphome.io
Build
Build firmware from the device configuration.
Sources
Replacement firmware

Add supported Shelly devices directly to Apple Home for control and automations.

How to get started

Follow the project’s stock-firmware prerequisite, upload Shelly-HomeKit over the local network and pair the device with Apple Home.

Setup
network firmware upload (OTA)
You’ll need
Exact supported model/generation; stock prerequisite specified by the project.; Replaces stock firmware; Shelly Cloud and MQTT are not included.
Open device guidegithub.com
Original project github.com
Setup
Check the exact Shelly model/generation and upstream stock-firmware prerequisite.
Limitations
Shelly Cloud and MQTT are not supported by this firmware. Temperature/humidity measurement requires the documented AddOn/sensor hardware where indicated.
Configured features
Power measurement
Limitations
Shelly Cloud and MQTT are not supported by this firmware.
Limitations
Temperature/humidity measurement requires the documented AddOn/sensor hardware where indicated.
Replacement firmware

Control compatible smart-home devices locally through a web interface and MQTT automations.

How to get started

Install firmware for the device’s controller, then apply its documented template. Many first installations require opening the device and connecting a serial adapter.

Setup
Firmware installation + device template
You’ll need
The controller and template listed in the device record; disconnect mains power before a serial connection.
Open installation guidetasmota.github.io
Original project tasmota.github.io
Sources

Features & details

Check the project and hardware shown for each feature.

Tasmota

Tasmota — Tasmota templates (github.com)

Installation method recorded
mgos

Shelly HomeKit

Shelly HomeKit — Source documentation (github.com)

Shutter mode documented
Yes

Security

Saved scan

No device-specific advisory matched our saved CVE research.

Check security advisories for this device · CVE.org