Replacement firmware
Use the relay directly in Apple Home and its automations.
Applies toFirmware: Gen3; stock prerequisite documented as 2.0.0
How to get started
Follow the project’s stock-firmware prerequisite, install Shelly-HomeKit over the local network and pair it with Apple Home.
- Setup
- network firmware upload (OTA)
- You’ll need
- Exact supported model/generation; stock prerequisite specified by the project.; Replaces stock firmware; Shelly Cloud and MQTT are not included.
Open device guidegithub.com
- Setup
- Check the exact Shelly model/generation and upstream stock-firmware prerequisite.
- Limitations
- Shelly Cloud and MQTT are not supported by this firmware. Temperature/humidity measurement requires the documented AddOn/sensor hardware where indicated.
- Limitations
- Shelly Cloud and MQTT are not supported by this firmware.
- Limitations
- Temperature/humidity measurement requires the documented AddOn/sensor hardware where indicated.