Deviceways

Security camera

Sannce I21AG

Contribute

Projects for this device

Replacement firmware

Use a community camera firmware on listed older hardware.

How to get started

Install the model’s SD bootloader through the documented recovery process, then keep the custom firmware files and Wi-Fi settings on a microSD card.

Setup
Model-specific bootloader installation and SD-card firmware
You’ll need
Exact camera hardware and starting firmware; matching bootloader and microSD card kept inserted.
Open device guidegithub.com
Original project github.com
Setup
Check exact model, processor revision and original firmware before using the upstream custom firmware.
Limitations
The README warns that newer original firmware can disable this installation method. Classic ARM Xiaofang uses a different project; Xiaofang 1S T20L support is beta.
Limitations
The README warns that newer original firmware can disable this installation method.; Classic ARM Xiaofang uses a different project; Xiaofang 1S T20L support is beta.
  • Classic ARM Xiaofang uses a different project; Xiaofang 1S T20L support is beta.
  • The README warns that newer original firmware can disable this installation method.
Replacement firmware
Experimental

Replace supported camera firmware with local RTSP and ONVIF video, browser controls and recording to an SD card or network storage.

How to get started

Match the camera’s hardware to the supported list and follow its installation page. The method may use an SD installer, USB Cloner, serial access or a flash programmer.

Setup
Replacement firmware; model-specific flashing method
You’ll need
Exact listed processor, image sensor and Wi-Fi combination; equipment specified in its model guide.
Original project github.comInstallation guide github.com

Hardware details

Security

Saved scan

No device-specific advisory matched our saved CVE research.

Check security advisories for this device · CVE.org