Router

Sagem F@ST2504n

Projects for this device

Replacement firmware

OpenWrt

Replace router software with a customizable system for network controls and community packages.

How to get started

Follow the guide for your exact router version. The first installation may use its web interface, recovery mode or a serial connection.

Setup: Firmware replacement; route varies by router
You’ll need: Exact hardware revision, an appropriate OpenWrt release and its model-specific installation guide.

v.6: Open device guide
v.6: Open hardware record

Original project github.com

Recorded configuration: 8 MB flash; 64 MB RAM

Limitations: DSL modem WiFi 2.4GHz
First installation: CFE TFTP + serial recovery
Limitations: DSL modem
Limitations: WiFi 2.4GHz

Sources

Features & details

Check the project and hardware shown for each feature.

Device details

sagem fast2504n v.6 — device documentation (github.com)Device details — Source documentation (openwrt.org)

Hardware revision: v.6

OpenWrt · v.6

OpenWrt · v.6 — Source documentation (openwrt.org)

Installation routes recorded: CFE TFTP + serial recovery
Recovery routes recorded: CFE TFTP + serial recovery
Availability recorded by source: Discontinued 2012

Hardware details

Documented hardware

sagem fast2504n v.6 — device documentation (github.com)Documented hardware — Source documentation (openwrt.org)

Hardware revision: v.6
Flash: 8 MB
Processor: Broadcom BCM6362
Memory: 64 MB
Hardware revision: v.6
Wi-Fi chip: Broadcom BCM435F

Security

Saved scan 18 Oct 2026

No device-specific advisory matched our saved CVE research.

Check security advisories for this device · CVE.org