Wireless access point

Qxwlan E600GAC

Projects for this device

Replacement firmware

OpenWrt

Replace router software with a customizable system for network controls and community packages.

How to get started

Follow the guide for your exact router version. The first installation may use its web interface, recovery mode or a serial connection.

Setup: Firmware replacement; route varies by router
You’ll need: Exact hardware revision, an appropriate OpenWrt release and its model-specific installation guide.

v2: Open device guide Release listed · 25.12.5
v2: Open hardware record

Original project github.com

Recorded configuration: 8/16 MB flash; 128 MB RAM

First installation: U-Boot TFTP recovery; U-Boot web recovery

Sources

Qxwlan E600GAC — Project reference (openwrt.org) ↗

Features & details

Check the project and hardware shown for each feature.

Device details

qxwlan e600gac v2 — device documentation (github.com)Device details — Source documentation (openwrt.org)

Hardware revision: v2

OpenWrt · v2

OpenWrt · v2 — Source documentation (openwrt.org)

Installation routes recorded: U-Boot TFTP recovery, U-Boot web recovery

Hardware details

Documented hardware

qxwlan e600gac v2 — device documentation (github.com)Documented hardware — Source documentation (openwrt.org)

Processor: Qualcomm Atheros QCA9531
Hardware revision: v2
Flash: 16 MB
Flash: 8 MB
Processor / Wi-Fi: Qualcomm Atheros QCA9531
Memory: 128 MB
Hardware revision: v2
Wi-Fi chip: Qualcomm Atheros QCA9887

Security

Saved scan 18 Oct 2026

No device-specific advisory matched our saved CVE research.

Check security advisories for this device · CVE.org