Replacement firmware
- Hardware revision not specified
- Beta build · 10-13-2026-r66345
Browse firmware downloadsdownload1.dd-wrt.com
Router
NETGEAR R7800
Projects for this device
Replacement firmware
Replace router software with a customizable system for network controls and community packages.
How to get started
Follow the guide for your exact router version. The first installation may use its web interface, recovery mode or a serial connection.
- Setup
- Firmware replacement; route varies by router
- You’ll need
- Exact hardware revision, an appropriate OpenWrt release and its model-specific installation guide.
- -100NAS (v2)
- Open hardware record
- Hardware revision not specified
- Get OpenWrt firmware Release listed · 25.12.6
- Hardware revision not specified
- Open hardware record
No separate retail hardware revision is recorded.
- Limitations
- NSS cores
- First installation
- GUI OEM; U-Boot TFTP recovery; see forum
Community modification
Apply address blocklists to traffic passing through the router, including supported VPN traffic.
Applies toFirmware: Voxel firmware; Aegis README version1.7.12
How to get started
Install the add-on from the router’s terminal on Voxel firmware, choosing internal storage or a USB drive. Configure the lists you want it to use.
- Setup
- Router terminal add-on
- You’ll need
- Voxel firmware and its documented dependencies
Features & details
Check the project and hardware shown for each feature.
Device details
- Hardware revision
- v2
Device details
- Hardware revision
- -100NAS (v2)
OpenWrt
- Installation routes recorded
- GUI OEM, U-Boot TFTP recovery, see forum
- Recovery routes recorded
- U-Boot TFTP recovery
- Availability recorded by source
- Discontinued 2021
Hardware differences
Technical references
Security
Saved scan
From our saved security research.
Model advisories
Selected highlightsPrioritized by known exploitation, severity, then date.
NETGEAR R7800
Certain NETGEAR devices are affected by lack of access control at the function level
- Affected firmware
- R7800: before 1.0.2.58
- Fix
- Fix details in the linked record
Details and sources
Certain NETGEAR devices are affected by lack of access control at the function level. This affects D6220 before 1.0.0.48, D6400 before 1.0.0.82, D7000v2 before 1.0.0.52, D7800 before 1.0.1.44, D8500 before 1.0.3.43, DC112A before 1.0.0.40, DGN2200v4 before 1.0.0.108, RBK50 before 2.3.0.32, RBR50 before 2.3.0.32, RBS50 before 2.3.0.32, RBK20 before 2.3.0.28, RBR20 before 2.3.0.28, RBS20 before 2.3.0.28, RBK40 before 2.3.0.28, RBR40 before 2.3.0.28, RBS40 before 2.3.0.28, R6020 before 1.0.0.34, R6080 before 1.0.0.34, R6120 before 1.0.0.44, R6220 before 1.1.0.80, R6230 before 1.1.0.80, R6250 before 1.0.4.34, R6260 before 1.1.0.40, R6850 before 1.1.0.40, R6350 before 1.1.0.40, R6400v2 before 1.0.2.62, R6700v3 before 1.0.2.62, R6700v2 before 1.2.0.36, R6800 before 1.2.0.36, R6900v2 before 1.2.0.36, R7000 before 1.0.9.34, R6900P before 1.3.1.44, R7000P before 1.3.1.44, R7100LG before 1.0.0.48, R7200 before 1.2.0.48, R7350 before 1.2.0.48, R7400 before 1.2.0.48, R7450 before 1.2.0.36, AC2100 before 1.2.0.36, AC2400 before 1.2.0.36, AC2600 before 1.2.0.36, R7500v2 before 1.0.3.38, R7800 before 1.0.2.58, R7900 before 1.0.3.8, R7960P before 1.4.1.44, R8000 before 1.0.4.28, R7900P before 1.4.1.30, R8000P before 1.4.1.30, R8900 before 1.0.4.2, R9000 before 1.0.4.2, RAX120 before 1.0.0.74, RBK752 before 3.2.16.6, RBR750 before 3.2.16.6, RBS750 before 3.2.16.6, RBK852 before 3.2.16.6, RBR850 before 3.2.16.6, RBS850 before 3.2.16.6, WNR3500Lv2 before 1.2.0.56, XR450 before 2.3.2.32, and XR500 before 2.3.2.32.
NETGEAR R7800
Certain NETGEAR devices are affected by a buffer overflow by an authenticated user
- Affected firmware
- R7800: before 1.0.2.74
- Fix
- Fix details in the linked record
Details and sources
Certain NETGEAR devices are affected by a buffer overflow by an authenticated user. This affects R6700v3 before 1.0.4.98, R6400v2 before 1.0.4.98, R7000 before 1.0.11.106, R6900P before 1.3.2.124, R7000P before 1.3.2.124, R7900 before 1.0.4.26, R7850 before 1.0.5.60, R8000 before 1.0.4.58, RS400 before 1.5.0.48, R6400 before 1.0.1.62, R6700 before 1.0.2.16, R6900 before 1.0.2.16, MK60 before 1.0.5.102, MR60 before 1.0.5.102, MS60 before 1.0.5.102, CBR40 before 2.5.0.10, R8000P before 1.4.1.62, R7960P before 1.4.1.62, R7900P before 1.4.1.62, RAX15 before 1.0.1.64, RAX20 before 1.0.1.64, RAX75 before 1.0.3.102, RAX80 before 1.0.3.102, RAX200 before 1.0.2.102, RAX45 before 1.0.2.64, RAX50 before 1.0.2.64, EX7500 before 1.0.0.68, EAX80 before 1.0.1.62, EAX20 before 1.0.0.36, RBK752 before 3.2.16.6, RBK753 before 3.2.16.6, RBK753S before 3.2.16.6, RBK754 before 3.2.16.6, RBR750 before 3.2.16.6, RBS750 before 3.2.16.6, RBK852 before 3.2.16.6, RBK853 before 3.2.16.6, RBK854 before 3.2.16.6, RBR850 before 3.2.16.6, RBS850 before 3.2.16.6, RBR840 before 3.2.16.6, RBS840 before 3.2.16.6, R6120 before 1.0.0.70, R6220 before 1.1.0.100, R6230 before 1.1.0.100, R6260 before 1.1.0.76, R6850 before 1.1.0.76, R6350 before 1.1.0.76, R6330 before 1.1.0.76, D7800 before 1.0.1.58, RBK50 before 2.6.1.40, RBR50 before 2.6.1.40, RBS50 before 2.6.1.40, RBK40 before 2.6.1.36, RBR40 before 2.6.1.36, RBS40 before 2.6.1.38, RBK23 before 2.6.1.36, RBR20 before 2.6.1.38, RBS20 before 2.6.1.38, RBK12 before 2.6.1.44, RBK13 before 2.6.1.44, RBK14 before 2.6.1.44, RBK15 before 2.6.1.44, RBR10 before 2.6.1.44, RBS10 before 2.6.1.44, R6800 before 1.2.0.72, R6900v2 before 1.2.0.72, R6700v2 before 1.2.0.72, R7200 before 1.2.0.72, R7350 before 1.2.0.72, R7400 before 1.2.0.72, R7450 before 1.2.0.72, AC2100 before 1.2.0.72, AC2400 before 1.2.0.72, AC2600 before 1.2.0.72, R7800 before 1.0.2.74, R8900 before 1.0.5.24, R9000 before 1.0.5.24, RAX120 before 1.0.1.136, XR450 before 2.3.2.66, XR500 before 2.3.2.66, XR700 before 1.0.1.34, and XR300 before 1.0.3.50.
NETGEAR R7800
Certain NETGEAR devices are affected by a buffer overflow by an unauthenticated attacker
- Affected firmware
- R7800: before 1.0.2.74
- Fix
- Fix details in the linked record
Details and sources
Certain NETGEAR devices are affected by a buffer overflow by an unauthenticated attacker. This affects AC2100 before 1.2.0.72, AC2400 before 1.2.0.72, AC2600 before 1.2.0.72, CBK40 before 2.5.0.10, CBR40 before 2.5.0.10, D7800 before 1.0.1.58, EAX20 before 1.0.0.36, EAX80 before 1.0.1.62, EX7500 before 1.0.0.68, MK62 before 1.0.5.102, MR60 before 1.0.5.102, MS60 before 1.0.5.102, R6120 before 1.0.0.70, R6220 before 1.1.0.100, R6230 before 1.1.0.100, R6260 before 1.1.0.76, R6330 before 1.1.0.76, R6350 before 1.1.0.76, R6400 before 1.0.1.62, R6400v2 before 1.0.4.98, R6700 before 1.0.2.16, R6700v2 before 1.2.0.72, R6700v3 before 1.0.4.98, R6800 before 1.2.0.72, R6850 before 1.1.0.76, R6900P before 1.3.2.124, R6900 before 1.0.2.16, R6900v2 before 1.2.0.72, R7000 before 1.0.11.106, R7000P before 1.3.2.124, R7200 before 1.2.0.72, R7350 before 1.2.0.72, R7400 before 1.2.0.72, R7450 before 1.2.0.72, R7800 before 1.0.2.74, R7850 before 1.0.5.60, R7900 before 1.0.4.26, R7900P before 1.4.1.62, R7960P before 1.4.1.62, R8000 before 1.0.4.58, R8000P before 1.4.1.62, R8900 before 1.0.5.24, R9000 before 1.0.5.24, RAX120 before 1.0.1.136, RAX15 before 1.0.1.64, RAX20 before 1.0.1.64, RAX200 before 1.0.2.102, RAX45 before 1.0.2.64, RAX50 before 1.0.2.64, RAX75 before 1.0.3.102, RAX80 before 1.0.3.102, RBK12 before 2.6.1.44, RBR10 before 2.6.1.44, RBS10 before 2.6.1.44, RBK20 before 2.6.1.38, RBR20 before 2.6.1.36, RBS20 before 2.6.1.38, RBK40 before 2.6.1.38, RBR40 before 2.6.1.36, RBS40 before 2.6.1.38, RBK50 before 2.6.1.40, RBR50 before 2.6.1.40, RBS50 before 2.6.1.40, RBK752 before 3.2.16.6, RBR750 before 3.2.16.6, RBS750 before 3.2.16.6, RBK752 before 3.2.16.6, RBR750 before 3.2.16.6, RBS750 before 3.2.16.6, RBK842 before 3.2.16.6, RBR840 before 3.2.16.6, RBS840 before 3.2.16.6, RBK852 before 3.2.16.6, RBR850 before 3.2.16.6, RBS850 before 3.2.16.6, RS400 before 1.5.0.48, XR300 before 1.0.3.50, XR450 before 2.3.2.66, XR500 before 2.3.2.66, and XR700 before 1.0.1.34.
NETGEAR R7800
Certain NETGEAR devices are affected by command injection by an unauthenticated attacker
- Affected firmware
- R7800: before 1.0.2.80
- Fix
- Fix details in the linked record
Details and sources
Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects D7800 before 1.0.1.64, EX6200v2 before 1.0.1.86, EX6250 before 1.0.0.134, EX7700 before 1.0.0.216, EX8000 before 1.0.1.232, LBR20 before 2.6.3.50, R7800 before 1.0.2.80, R8900 before 1.0.5.26, R9000 before 1.0.5.26, RAX120 before 1.2.0.16, RBS50Y before 1.0.0.56, WNR2000v5 before 1.0.0.76, XR450 before 2.3.2.114, XR500 before 2.3.2.114, XR700 before 1.0.1.36, EX6150v2 before 1.0.1.98, EX7300 before 1.0.2.158, EX7320 before 1.0.0.134, EX6100v2 before 1.0.1.98, EX6400 before 1.0.2.158, EX7300v2 before 1.0.0.134, EX6410 before 1.0.0.134, RBR10 before 2.6.1.44, RBR20 before 2.6.2.104, RBR40 before 2.6.2.104, RBR50 before 2.7.2.102, EX6420 before 1.0.0.134, RBS10 before 2.6.1.44, RBS20 before 2.6.2.104, RBS40 before 2.6.2.104, RBS50 before 2.7.2.102, EX6400v2 before 1.0.0.134, RBK12 before 2.6.1.44, RBK20 before 2.6.2.104, RBK40 before 2.6.2.104, and RBK50 before 2.7.2.102.
NETGEAR R7800
Certain NETGEAR devices are affected by command injection by an unauthenticated attacker
- Affected firmware
- R7800: before 1.0.2.80
- Fix
- Fix details in the linked record
Details and sources
Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects EX6200v2 before 1.0.1.86, EX6250 before 1.0.0.134, EX7700 before 1.0.0.216, EX8000 before 1.0.1.232, LBR1020 before 2.6.3.58, LBR20 before 2.6.3.50, R7800 before 1.0.2.80, R8900 before 1.0.5.26, R9000 before 1.0.5.26, RBS50Y before 2.7.3.22, WNR2000v5 before 1.0.0.76, XR700 before 1.0.1.36, EX6150v2 before 1.0.1.98, EX7300 before 1.0.2.158, EX7320 before 1.0.0.134, RAX10 before 1.0.2.88, RAX120 before 1.2.0.16, RAX70 before 1.0.2.88, EX6100v2 before 1.0.1.98, EX6400 before 1.0.2.158, EX7300v2 before 1.0.0.134, R6700AX before 1.0.2.88, RAX120v2 before 1.2.0.16, RAX78 before 1.0.2.88, EX6410 before 1.0.0.134, RBR10 before 2.7.3.22, RBR20 before 2.7.3.22, RBR350 before 4.3.4.7, RBR40 before 2.7.3.22, RBR50 before 2.7.3.22, EX6420 before 1.0.0.134, RBS10 before 2.7.3.22, RBS20 before 2.7.3.22, RBS350 before 4.3.4.7, RBS40 before 2.7.3.22, RBS50 before 2.7.3.22, EX6400v2 before 1.0.0.134, RBK12 before 2.7.3.22, RBK20 before 2.7.3.22, RBK352 before 4.3.4.7, RBK40 before 2.7.3.22, and RBK50 before 2.7.3.22.