Router

Linksys E1700

Contribute

Projects for this device

Replacement firmware

Replace router software with a customizable system for network controls and community packages.

How to get started

Follow the guide for your exact router version. The first installation may use its web interface, recovery mode or a serial connection.

Setup
Firmware replacement; route varies by router
You’ll need
Exact hardware revision, an appropriate OpenWrt release and its model-specific installation guide.
Hardware revision not specified
Get OpenWrt firmware Release listed · 25.12.6
Hardware revision not specified
Get firmware Release listed · 25.12.5
Hardware revision not specified
Open hardware record Release listed · 25.12.5

Recorded configuration: 8 MB flash; 64 MB RAM

First installation
U-Boot TFTP recovery
Sources

Features & details

Check the project and hardware shown for each feature.

OpenWrt

OpenWrt — Source documentation (openwrt.org)

Installation routes recorded
U-Boot TFTP recovery
Recovery routes recorded
U-Boot TFTP recovery
Availability recorded by source
Discontinued

Hardware details

Technical references

Security

Saved scan

From our saved security research.

Model advisories

Selected highlights

Prioritized by known exploitation, severity, then date.

CVSS 10.0 (v4.0)

E1700

Linksys E1700 Mac Filter ssid1MACFilter stack-based overflow

CVE-2026-108892

Affected firmware
1.0.0.4.003
Fix
Fix details in the linked record
Read VulDB CVE record
Details and sources

A vulnerability was determined in Linksys E1700 1.0.0.4.003. This vulnerability affects the function ssid1MACFilter of the file /goform/ssid1MACFilter of the component Mac Filter. This manipulation of the argument newap_text_%d causes stack-based buffer overflow. The attack may be initiated remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.

VDB-416684 | Linksys E1700 Mac Filter ssid1MACFilter stack-based overflow — E1700 (vuldb.com) ↗VDB-416684 | CTI Indicators (IOB, IOC, IOA) — E1700 (vuldb.com) ↗CVE-2026-108892 | CVE Analysis and Report — E1700 (vuldb.com) ↗Submit #973111 | Linksys E1700 1.0.0.4.003 Stack-based Buffer Overflow — E1700 (vuldb.com) ↗

CVSS 9.4 (v4.0)

E1700

Linksys E1700 setLinksysIpv6 os command injection

CVE-2026-108896

Affected firmware
1.0.0.4.003
Fix
Fix details in the linked record
Read VulDB CVE record
Details and sources

A vulnerability was found in Linksys E1700 1.0.0.4.003. This affects the function setLinksysIpv6 of the file /goform/setLinksysIpv6. The manipulation of the argument _6rd_prefix/_6rd_prefix_len results in os command injection. The attack can be launched remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.

VDB-416683 | Linksys E1700 setLinksysIpv6 os command injection — E1700 (vuldb.com) ↗VDB-416683 | CTI Indicators (IOB, IOC, TTP, IOA) — E1700 (vuldb.com) ↗CVE-2026-108896 | CVE Analysis and Report — E1700 (vuldb.com) ↗Submit #973115 | Linksys E1700 1.0.0.4.003 OS Command Injection — E1700 (vuldb.com) ↗

CVSS 9.4 (v4.0)

E1700

Linksys E1700 setDMZ os command injection

CVE-2026-108895

Affected firmware
1.0.0.4.003
Fix
Fix details in the linked record
Read VulDB CVE record
Details and sources

A weakness has been identified in Linksys E1700 1.0.0.4.003. The affected element is the function setDMZ of the file /goform/setDMZ. Executing a manipulation of the argument MAC_addr can lead to os command injection. The attack can be executed remotely. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.

VDB-416687 | Linksys E1700 setDMZ os command injection — E1700 (vuldb.com) ↗VDB-416687 | CTI Indicators (IOB, IOC, TTP, IOA) — E1700 (vuldb.com) ↗CVE-2026-108895 | CVE Analysis and Report — E1700 (vuldb.com) ↗Submit #973114 | Linksys E1700 1.0.0.4.003 OS Command Injection — E1700 (vuldb.com) ↗

CVSS 9.4 (v4.0)

E1700

Linksys E1700 Static Route addStaticRoute os command injection

CVE-2026-108894

Affected firmware
1.0.0.4.003
Fix
Fix details in the linked record
Read VulDB CVE record
Details and sources

A security flaw has been discovered in Linksys E1700 1.0.0.4.003. Impacted is the function addStaticRoute of the file /goform/addStaticRoute of the component Static Route Handler. Performing a manipulation of the argument staticRoute_IP_setting/staticRoute_Netmask_setting/staticRoute_Gateway_setting/staticRoute_Metric_setting results in os command injection. Remote exploitation of the attack is possible. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.

VDB-416686 | Linksys E1700 Static Route addStaticRoute os command injection — E1700 (vuldb.com) ↗VDB-416686 | CTI Indicators (IOB, IOC, TTP, IOA) — E1700 (vuldb.com) ↗CVE-2026-108894 | CVE Analysis and Report — E1700 (vuldb.com) ↗Submit #973113 | Linksys E1700 1.0.0.4.003 OS Command Injection — E1700 (vuldb.com) ↗

CVSS 9.4 (v4.0)

E1700

Linksys E1700 setVlan stack-based overflow

CVE-2026-108893

Affected firmware
1.0.0.4.003
Fix
Fix details in the linked record
Read VulDB CVE record
Details and sources

A vulnerability was identified in Linksys E1700 up to 1.0.0.4.003. This issue affects the function setVlan of the file /goform/setVlan. Such manipulation of the argument vlan_set leads to stack-based buffer overflow. The attack may be launched remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

VDB-416685 | Linksys E1700 setVlan stack-based overflow — E1700 (vuldb.com) ↗VDB-416685 | CTI Indicators (IOB, IOC, IOA) — E1700 (vuldb.com) ↗CVE-2026-108893 | CVE Analysis and Report — E1700 (vuldb.com) ↗Submit #973112 | Linksys E1700 1.0.0.4.003 Stack-based Buffer Overflow — E1700 (vuldb.com) ↗
Check more security advisories for this device · CVE.org