Smart plug

Gosund WP3

Projects for this device

Replacement firmware

ESPHome

Control the plug locally from Home Assistant.

How to get started

Use the WP3 configuration after establishing a suitable initial programming connection.

Setup: ESPHome configuration; initial flashing path unresolved
You’ll need: The documented ESP8266 WP3 hardware; ESPHome installation access.

Open device guidedevices.esphome.io

Original project esphome.io

Build: Build firmware from the device configuration.

Sources

index — ESPHome (github.com) ↗

Replacement firmware

Tasmota

Control compatible smart-home devices locally through a web interface and MQTT automations.

How to get started

Install firmware for the device’s controller, then apply its documented template. Many first installations require opening the device and connecting a serial adapter.

Setup: Firmware installation + device template
You’ll need: The controller and template listed in the device record; disconnect mains power before a serial connection.

Get device templatetemplates.blakadder.com

Original project tasmota.github.io

Sources

Gosund WP3 — Project reference (tasmota.github.io) ↗

Features & details

Check the project and hardware shown for each feature.

Tasmota

Tasmota — Tasmota templates (github.com)

Installation method recorded: tuya-convert

Security

Saved scan 18 Oct 2026

No device-specific advisory matched our saved CVE research.

Check security advisories for this device · CVE.org