Deviceways

Smart plug

Gosund SP211

Contribute

Projects for this device

Replacement firmware

Create local smart-home controls and automations using the device’s documented configuration.

How to get started

Start with the device configuration, add your network settings and build the firmware. Use the first-install route specified in that device’s guide.

Setup
Custom configuration + firmware installation
You’ll need
The documented board version and pin configuration; a serial adapter or another supported installation route.
Hardware revision not specified
Open device guide
Hardware revision not specified
Open device guide
Original project esphome.io

No separate retail hardware revision is recorded.

Build
Build firmware from the device configuration.
Configured features
Electrical measurements

No separate retail hardware revision is recorded.

Build
Build firmware from the device configuration.
Configured features
Electrical measurements
Sources
Replacement firmware

Use supported smart-home devices locally with MQTT and Home Assistant integrations.

How to get started

Identify the controller, use its supported flashing tool and apply the device’s pin settings. The linked device record may show the wiring.

Setup
Controller-specific firmware installation + pin setup
You’ll need
Matching controller and pin configuration; first installation commonly needs a serial adapter.
BK7231N
Open device guide
RTL87X0C
Open device guide
Original project github.com

BK7231N

Configured features
Electrical measurements

RTL87X0C

Configured features
Electrical measurements
Sources

Hardware differences

Security

Saved scan

No device-specific advisory matched our saved CVE research.

Check security advisories for this device · CVE.org