Router

D-Link DIR-3060

Projects for this device

Replacement firmware

OpenWrt

Replace router software with a customizable system for network controls and community packages.

How to get started

Follow the guide for your exact router version. The first installation may use its web interface, recovery mode or a serial connection.

Setup: Firmware replacement; route varies by router
You’ll need: Exact hardware revision, an appropriate OpenWrt release and its model-specific installation guide.

A1: Get OpenWrt firmware Release listed · 25.12.6
rev A1: Open hardware record
A1: Open hardware record Release listed · 25.12.5

Original project github.com

Recorded configuration: 128NAND MB flash; 256 MB RAM

First installation: D-Link Recovery GUI

Sources

Features & details

Check the project and hardware shown for each feature.

Device details

d-link dir-3060 a1 — device documentation (github.com)Device details — Source documentation (openwrt.org)

Hardware revision: A1

Device details

D-Link DIR-3060 rev A1 — TechInfoDepot (github.com)

Hardware revision: rev A1

OpenWrt · A1

OpenWrt · A1 — Source documentation (openwrt.org)

Installation routes recorded: D-Link Recovery GUI
Recovery routes recorded: D-Link Recovery GUI
Availability recorded by source: Discontinued 2021

Hardware details

Documented hardware

d-link dir-3060 a1 — device documentation (github.com)D-Link DIR-3060 rev A1 — TechInfoDepot (github.com)Documented hardware — Source documentation (openwrt.org)

Processor: MediaTek MT7621AT
Hardware revision: A1
Hardware revision: rev A1
Wi-Fi chip: MediaTek MT7615DN
Wi-Fi chip: MediaTek MT7615N
Processor: MediaTek MT7621AT
Memory: 256 MB
Hardware revision: A1

Security

Saved scan 18 Oct 2026

From our saved security research.

Model advisories

Selected highlights

Prioritized by known exploitation, severity, then date.

CVE published 11 Mar 2021

D-Link DIR-3060

prog.cgi on D-Link DIR-3060 devices before 1.11b04 HF2 allows remote authenticated users to inject arbitrary commands in an admin or root context because SetVirtualServerSettings calls…

CVE-2021-28144

Affected firmware: Version details in source scope
Fix: Fix details in the linked record

Read mitre CVE record

Details and sources

CVE updated 3 Aug 2024

prog.cgi on D-Link DIR-3060 devices before 1.11b04 HF2 allows remote authenticated users to inject arbitrary commands in an admin or root context because SetVirtualServerSettings calls CheckArpTables, which calls popen unsafely.

Check more security advisories for this device · CVE.org