Deviceways

Wireless access point

D-Link DAP-2610

Contribute

Projects for this device

Replacement firmware

Replace router software with a customizable system for network controls and community packages.

How to get started

Follow the guide for your exact router version. The first installation may use its web interface, recovery mode or a serial connection.

Setup
Firmware replacement; route varies by router
You’ll need
Exact hardware revision, an appropriate OpenWrt release and its model-specific installation guide.
A1
Get OpenWrt firmware Release listed · 25.12.6
A1
Open hardware record
Original project github.com

Recorded configuration: 16 MB flash; 256 MB RAM

First installation
GUI OEM
Sources

Features & details

Check the project and hardware shown for each feature.

Device details

d-link dap-2610 — device documentation (github.com)D-Link DAP-2610 rev A1 — TechInfoDepot (github.com)D-Link DAP-2610 rev A1 — WikiDevi (github.com)Device details — Source documentation (openwrt.org)

Hardware revision
A1

OpenWrt · A1

OpenWrt · A1 — Source documentation (openwrt.org)

Installation routes recorded
GUI OEM
Availability recorded by source
Available 2024

Hardware details

Security

Saved scan

From our saved security research.

Model advisories

Selected highlights

Prioritized by known exploitation, severity, then date.

CVE published

CVSS 8.8 (v3.1)

D-Link DAP-2610

D-Link DAP-2610 up to 2.06B08r099 contains an authenticated command injection vulnerability within the web interface at the /index.xgi endpoint

CVE-2025-51457

Affected firmware
DAP-2610: up to 2.06B08r099
Fix
Fix details in the linked record
Read mitre CVE record
Details and sources
CVE updated

D-Link DAP-2610 up to 2.06B08r099 contains an authenticated command injection vulnerability within the web interface at the /index.xgi endpoint. An attacker with authenticated access can exploit some parameters to execute arbitrary system commands.

Security advisory publication.aspx — D-Link DAP-2610 (supportannouncement.us.dlink.com) ↗
CVE published

CVSS 8.8 (v3.0)

DAP-2610

This vulnerability allows network-adjacent attackers to bypass authentication on affected installations of D-Link DAP-2610 Firmware v2.01RC067 routers

CVE-2020-8862

Affected firmware
Firmware v2.01RC067
Fix
Fix details in the linked record
Read zdi CVE record
Details and sources
CVE updated

This vulnerability allows network-adjacent attackers to bypass authentication on affected installations of D-Link DAP-2610 Firmware v2.01RC067 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of passwords. The issue results from the lack of proper password checking. An attacker can leverage this vulnerability to execute arbitrary code in the context of root. Was ZDI-CAN-10082.

Security advisory ZDI 20 266 — DAP-2610 (zerodayinitiative.com) ↗
Check more security advisories for this device · CVE.org