Security camera

ATOM Cam 2

Contribute

Projects for this device

SD-card add-on

AtomCam Tools adds RTSP, HomeKit and timelapse using a microSD card alongside the manufacturer firmware.

How to get started

Put the release files on a compatible FAT-formatted microSD card, boot the camera with it, then configure the tools in a browser.

Setup
SD-card add-on to original firmware
You’ll need
Match the camera and firmware; keep microSD inserted. Wyze v3 support is experimental.

2.5.19 · 2025-05-16

Get add-on filesgithub.com
Setup
Check the exact camera and supported original firmware in the project instructions.
Limitations
This extends the manufacturer software; it does not replace the camera OS.
Tested manufacturer firmware
4.58.0.139; 4.58.0.154; 4.58.0.160
Manufacturer updates
Check the project’s compatibility notes before updating the original firmware.
Sources
Community modification

Add RTSP, NAS recording and a local interface on listed cameras.

Applies toFirmware: 4.58.0.139 / 4.58.0.154 / 4.58.0.160

How to get started

Put the release files on a compatible FAT-formatted microSD card, boot the camera with it, then configure the tools in a browser.

Setup
SD-card add-on to original firmware
You’ll need
Match the camera and firmware; keep microSD inserted. Wyze v3 support is experimental.
Replacement firmware

Replace supported camera firmware with local RTSP and ONVIF video, browser controls and recording to an SD card or network storage.

How to get started

Match the camera’s hardware to the supported list and follow its installation page. The method may use an SD installer, USB Cloner, serial access or a flash programmer.

Setup
Replacement firmware; model-specific flashing method
You’ll need
Exact listed processor, image sensor and Wi-Fi combination; equipment specified in its model guide.

Hardware details

Security

Saved scan

No device-specific advisory matched our saved CVE research.

Check security advisories for this device · CVE.org